Atf 1500 Ford Transmission Fluid Change Cost Transmission Flush Kit
The transmission flush machine is a kind of machine that uses the
pressure generated by the machine to dynamically change the
automatic transmission oil. The oil change rate can reach 95% or
more. The operation process is simple, but it needs the support on
the equipment. In addition, because the traditional
gravity-replacement automatic transmission oil can only replace
about half of the waste oil, and the cycle machine can be replaced
more thoroughly, this can also extend the transmission oil
maintenance cycle appropriately.
Why change transmission oil?
The viscosity of the gearbox used for a long time will become
thinner, resulting in a decrease in lubrication performance, a
decrease in sealing performance, an increase in resistance and
increased wear, resulting in unstable pressure and affecting the
working accuracy of the hydraulic system. The gearbox control
accuracy is lowered, the shifting accuracy is lowered, and the
smoothness and response speed are affected. The oil cooling
performance and the oxidation resistance performance after the
deterioration are degraded, and the problem of excessive oil
temperature is likely to occur. Vicious cycle further shortens the
life of oil and transmission components.
|Working pressure||0-1.6 Mpa|
|Oil tube||2.5 m|
1. Do not smoke near the device while the device is in use.
2. Do not use the device near heat sources and sources of ignition.
3. This device can only be used indoors to avoid exposure to the
sun or rain.
4. Power off the unit after use.
5. Keep the hose away from rotating parts and hot parts of the car,
such as fans and radiators.
6. When replace the automatic transmission oil, it must be operated
by a professional operator. During operation, the professional
operator must pay attention to the operation of the machine. The
quality of the selected automatic transmission oil must meet the
requirements stated in the operated vehicle’s maintenance manual