Diesel Engine Cleaning Service Engine Decarbonising Products Carbon
Cleaning Machine Price
The microscopic process of hydrogen and oxygen removal of carbon
deposits is as follows:
1) During the intake of the engine, hydrogen and oxygen gas is
drawn into the engine.
a. The hydrogen gas is very light and quickly diffuses into the
b. Hydrogen has a very good characteristic, that is, the adhesion
ability, always attached to the inner wall of the engine, which is
the place with the most carbon deposit.
c. Another characteristic of hydrogen is the ability to penetrate.
Because of the small number of molecules of hydrogen, it can
quickly penetrate into the surface layer of carbon deposits.
2) Engine injection
3) Engine ignition
a. The first stage: oil, air, hydrogen attached to the carbon
surface, oxygen is lit, resulting in carbon oxides (mainly carbon
dioxide), nitrogen oxides, high temperature water vapor and
hydroxide ion clusters.
b. The second stage: water vapor, hydroxide ion clusters and carbon
deposits undergo high temperature water gas reaction, carbon
deposits with hydroxide ions attached are oxidized to carbon
monoxide and further oxidized to carbon dioxide
4) Engine compression work
The carbon deposit is discharged through the exhaust system by gas
|Gas Output||1500L/h ±10%|
|Working Pressure||≤0.2 Mpa|
|Ambient temperature range||5°C~50°C|
Why should do carbon cleaning for cars?
1. There are many reasons for increased carbon deposits: incomplete
combustion, poor oil quality, bad driving habit, low speed driving
for a long time, poor air quality, etc.
2. The carbon deposits causes ‘engine trembling, cold start
failure, driving weakness, fuel oil consumption increased, exhaust
emissions exceeded the standard’ and other failure.
3. The increased carbon deposits will heavily effect the vehicle
performance, resulting in 90% of engine component failures, fuel
consumption increased, excessive exhaust emission, shorten the
lifetime of engine and other relative accessories.
1. All the production process have a professional person to test
the machine and parts.
2. Products of our company all passed CE, FCC and other
3. Our machine are tested before exportation.